Table of Contents
Advertisement
Appendix E
Configure Output Behavior with RSLogix 5000 Version 16 and Earlier
Configure the 1756-CFM for
Use in a New Application
130
Complete this procedure if you are using the 1756-CFM module and the
configurable on/off feature in a new application.
Add the 1756-Generic Profile to the Program
1. In RSLogix 5000 software, create a new project named CFM_DEMO.
2. Specify the controller type, revision number, chassis type, and slot
number according to your ControlLogix® controller chassis.
3. In the I/O Configuration folder, add a new module.
4. Use the Generic 1756 Module profile listed in Other module types.
5. In the New Module dialog box, enter the Connection Parameter
information exactly as displayed below.
Enter the slot number
that matches the location
of the 1756-CFM module
in your ControlLogix
chassis.
6. Click OK.
The Module Properties dialog box opens.
7. Set the module RPI to 100.
8. Click OK.
The 1756-Generic module is now in the I/O configuration.
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
Advertisement
Table of Contents
