Table of Contents
Advertisement
Tag (continued)
ExpRelay1Status
Expansion Relay 1 (address 2) Status
ExpRelay1OverTemperature
Relay Module 1 Over Temperature Warning
ExpRelay1Relay0NotInhibited
Relay Module 1 Relay 0 Not Inhibited
ExpRelay1Relay1NotInhibited
Relay Module 1 Relay 1 Not Inhibited
ExpRelay1Relay2NotInhibited
Relay Module 1 Relay 2 Not Inhibited
ExpRelay1Relay3NotInhibited
Relay Module 1 Relay 3 Not Inhibited
ExpRelay1Relay0Fault
Relay Module 1 Relay 0 Fault
ExpRelay1Relay1Fault
Relay Module 1 Relay 1 Fault
ExpRelay1Relay2Fault
Relay Module 1 Relay 2 Fault
ExpRelay1Relay3Fault
Relay Module 1 Relay 3 Fault
ExpRelay2Status
Expansion Relay 2 (address 3) Status
ExpRelay2OverTemperature
Relay Module 2 Over Temperature Warning
ExpRelay2Relay0NotInhibited
Relay Module 2 Relay 0 Not Inhibited
ExpRelay2Relay1NotInhibited
Relay Module 2 Relay 1 Not Inhibited
ExpRelay2Relay2NotInhibited
Relay Module 2 Relay 2 Not Inhibited
ExpRelay2Relay3NotInhibited
Relay Module 2 Relay 3 Not Inhibited
ExpRelay2Relay0Fault
Relay Module 2 Relay 0 Fault
ExpRelay2Relay1Fault
Relay Module 2 Relay 1 Fault
ExpRelay2Relay2Fault
Relay Module 2 Relay 2 Fault
ExpRelay2Relay3Fault
Relay Module 2 Relay 3 Fault
Description (if = 1)
Expansion Relay Module 1 (Address 2)
Container value allows access to hidden tags. The hidden tags provide no user actionable information. They are
provided to assist device diagnostics only.
See the
Assembly Object
(class code 0x04), on page 517, for the assembly members and bit assignments.
Indicates when the processor board temperature is less than -20 °C (-4 °F) or greater than 70 °C (158 °F). While the
module rating is based on surrounding air temperature, depending on airflow, the board temperature can exceed the
surrounding air temperature by up to 25 °C (77 °F). This difference means that it is possible that the alarm limit could
be exceeded when the surrounding air temperature is as low as 45 °C (113 °F). Consequently, the indication is
considered only a warning.
Normally set. Indicates that the relay is not inhibited. Goes unset (0) when TripInhibit = 1 or HW control Trip Inhibit/
Bypass is set (all enabled relays are inhibited).
Relay drive test has failed.
Expansion Relay Module 2 (Address 3)
Container value allows access to hidden tags. The hidden tags provide no user actionable information. They are
provided to assist device diagnostics only.
See the
Assembly Object
(class code 0x04), on page 517, for the assembly members and bit assignments.
Indicates when the processor board temperature is less than -20 °C (-4 °F) or greater than 70 °C (158 °F). While the
module rating is based on surrounding air temperature, depending on airflow, the board temperature can exceed the
surrounding air temperature by up to 25 °C (77 °F). This difference means that it is possible that the alarm limit could
be exceeded when the surrounding air temperature is as low as 45 °C (113 °F). Consequently, the indication is
considered only a warning.
Normally set. Indicates that the relay is not inhibited. Goes unset (0) when TripInhibit = 1 or HW control Trip Inhibit/
Bypass is set (all enabled relays are inhibited).
Relay drive test has failed.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Operate the Module
Chapter 10
275
Hide quick links:
Advertisement
Table of Contents
