Table of Contents
Advertisement
Attribute Semantics
Current Module Status
The auxiliary output module reports its status as part of the normal exchanges
with the main module. The bit assignments are as follows.
Instance ID
Description
0
Auxiliary Module Not Responding
1
Auxiliary Module Configured
2
MSP Code (CRC) Fault
3
MSP High Temperature
4
Link Fail
5
Halt Active
6
MSP RAM Fault
7
MSP RAM Access Error
Bits 0...7 are common to all types of auxiliary module, bits 8 to 15 are specific
to type.
The auxiliary module controls Bits ...15, and the main module sets bit 0.
If bit 0 is set, the remaining bits do not reflect the current auxiliary module
status.
Bit
8
9
10
11
12
13
14
15
In the unlikely event the auxiliary module is found to be in Boot Loader mode
(not running operation firmware), the main module sets the auxiliary module
status to a special code: Decimal: 65,534, Hexadecimal: 0xFFFE, Binary:
11111111 11111110.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Description
Output 0 Is Not Inhibited
Output 1 Is Not Inhibited
Output 2 Is Not Inhibited
Output 3 Is Not Inhibited
Reserved
Reserved
Reserved
Reserved
CIP Objects
Appendix A
505
Hide quick links:
Advertisement
Table of Contents
