Dynamix Module Control Object - Allen-Bradley 1444-TSCX02-02RB User Manual

Appendix A CIP Objects
Dynamix Module Control
Object
Table 258 - Class Attributes
Attribute ID Access Rule
1 Get
Auxiliary Modules
2 Get
16 Get
17 Get
18 Get
19 Get
506
Although the auxiliary module is responding, it is in a non-operational state
and is classed as a failure from the perspective of a Fault Relay.
Table 255 - Not OK Configuration
Bit
0
1
2
Table 256 - Common Services
Service Implementation
Code
Class
0x0E x
Get requests to certain attributes require data to be requested from the
auxiliary module itself. If that module is not present/active on the bus, an
embedded server error is returned in response to the request.
The Module Control Object (class code 0x39E) provides module-level
controls, which are implemented in one instance.
DSP/NetX refer to the two on-board processors: the digital signal processor
and the "NetX", communication and condition monitoring auxiliary
processor.
Table 257 - Object Instances
Instance ID
0
NV Name
NV Revision
V Detected Auxiliary Modules
V Configured Auxiliary
Modules
NV Serial Number
- NetX CPU Usage
- Module Mode
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Description
No Action
Force Low (2.9 mA)
Force High (21 mA)
Service Name
Instance
x Get Attribute Single
Description
Module Control Class Instance
Data Type Description of Attribute Semantics of Values
UINT Current object revision.
A group of two configuration attributes.
BYTE Bit-wise indication of
detected auxiliary
modules.
BYTE Bit-wise configuration of
expected auxiliary
modules.
SHORT_STRING Warranty Serial Number
UINT Percentage CPU in use
BYTE Current Module Mode/
Running Status
Description of Service
Returns the contents of the specified attribute
Current revision.
Auxiliary modules
Auxiliary modules
Alpha-numeric
0 to 10,000
= 0 to 100%
0 startup, 1 run, 2 program mode