Table of Contents
Advertisement
Measurement Alarms Page
Table 45 - Alarms
Parameter
Values
Enable Alarm
Checked (1) / Unchecked (0)
Alarm Name
Characters
Measurement Available selections are dependent on the Channel
Type and the Channel Measurement Type for the
channel that is associated with each measurement.
See
General Page on page
See
Hardware Configuration Page on page
See
Table 46 on page 218
settings.
Condition
Select from:
• Greater Than
• Less Than
• Inside Range
• Outside Range
Page Overview
The following overview describes the dynamic measurement module.
Help
Check to enable the alarm.
Enter a name of up to 32 characters. There are no rules for the name content or uniqueness. However,
the name is used when you select Measurement Alarms as input to other functions, such as Voted Alarm
definition, so unique names are recommended. Additionally the name:
• Must start with a letter or underscore ("_").
• Must consist of letters, numbers, or underscores.
• Cannot contain two contiguous underscore characters.
• Cannot end in an underscore.
Select the measurement for the selected Measurement Alarm to evaluate.
97.
111.
to view all available
Select the desired condition.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Configure Alarms
Chapter 8
215
Hide quick links:
Advertisement
Table of Contents
