Annex - BONFIGLIOLI Vectron ACTIVE CUBE Series Manual

No. Description
1451 OS Synctime
1452 OS_SyncSource
1454 Override Modes Of Operation
1455 Override Target Position
1456 Override Profile Velocity
1457 Override Profile Acceleration
1458 Override Profile Deceleration
Override Target velocity vl
1459
[rpm]
Override Target velocity pv
1460
[u/s]
1)
Non volatile (fixed Parameterization)
0: All indexes in EEPROM
1...16: One Index in EEPROM
The setting "0" for
EEPROM and. RAM.
The parameter
0x2nnn. It cannot be accessed via the VPlus program or the KP500 control unit.
For Positioning and using the Motion Control Interface comply with the application manual "Position-
ing".

16 Annex

In the Annex different overviews and Tools are displayed for the usage of the communication inter-
face.
188
Unit
-
-
Motion Control Override
-
-
-
-
-
-
-
CANopen Mux Input Index (write)
414 is only accessible via the manufacturer objects
Data set selection
CM-EtherCAT
Display range Chapter
700...900 us 800 us
Selection 52 - Analog
Input MFI1A
Selection
Volatile
17: All indexes in RAM
18...33: One Index 1...16 in RAM
1420 changes all Data in
No.
9.10
11.8
0 13.7
-1 u 13.7
-1 u/s 13.7
-1 u/s² 13.7
-1 u/s² 13.7
-1 rpm 13.7
-1 u/s 13.7
07/13