BONFIGLIOLI Vectron ACTIVE CUBE Series Manual page 104

Mapping of object 0x60C1/1
subindex were selected via a selection list, conformity inconsistencies in the test speci-
fication would be the result.
Mapping of object 0x60C1/1
First, select RxPDO, after right clicking on RxPDO, select "Insert...". This will open a
dialogue for object mapping.
Object 0x60C1 is not displayed in the selection list, but must be entered as shown in
the illustration.
104
interpolation data record 1
interpolation data record 1
CM-EtherCAT
is not via a selection list.
is done manually.
If a
07/13