BONFIGLIOLI Vectron ACTIVE CUBE Series Manual page 76

No.
0x6046/1 Velocity min amount (RPM)
0x6046/2 Velocity max amount (RPM)
If objects 0x6046/1 or 0x6046/2 were written and then a save parameters command
(object 0x1010) processed, the object values are stored in non-volatile memory. After
the next power on of the inverter, the previously set values are reactivated and over-
write the settings of parameters
419.
cy
In Positioning applications the overall speed can fall below or exceed the limits defined
by Minimum and Maximum frequency due to the influence of the Position controller.
The output of the Position Controller can be limited by
76
Object
Output
Velocity max amount
Velocity min amount
Minimum Frequency
CM-EtherCAT
Min.
1
1
Input
Velocity min amount
Velocity max amount
418 and
Maximum Frequen-
1118.
Limitation
Max.
32767
(= 0x7FFF)
32767
(= 0x7FFF)
07/13