Table of Contents
Advertisement
Main Menu
Door lower Trim
Replacement
CAUTION:
• Put on gloves to protect you hands.
• When prying with a flat-tip screwdriver, wrap it with
protective tape to prevent damage.
NOTE:
• Take care not to scratch the door.
• Be careful not to damage the door lower trim.
1. Remove the door panel.
2. Remove the plastic cover as necessary.
3. Remove the special nuts and screws from inside of
the door.
4. Apply the protective tape along the edge of the door
lower trim to the door.
5. Carefully cut the adhesive tape around the entire
door lower trim with a utility knife.
Table of Contents
6. Slide the door lower trim rearward, and remove it.
The clips will stay in the door.
7. Remove the clips.
8. If necessary, replace any damaged clips.
Advertisement
Chapters
Table of Contents
