Chrysler Conquest 1988 Service Manual page 124

23-96
A$:\
19Y600
/
19Y628
19Y60:
SERVICE POINTS OF REMOVAL
2. REMOVAL OF SCUFF PLATE
Insert the trim stick between the clip and then body, and
remove the.scuff plate.
.-
3. REMOVAL OF ROOF SIDE TRIM
Insert the trim stick into the upper part of the roof side trim
:
from inside the vehicle, and then pull it forcefully while
prying downward.
4. REMOVAL OF FRONT PILLAR TRIM
Remove the front pillar trim by pulling it in the direction of ~_
the arrow. ~L~- ~
5. REMOVAL OF COWL SIDE TRIM / 6. ECI COVER
(1) Remove the relay box installation screvvs (driver's side),
and then remove the cowl side trim.~(driver's side).
(2) Remove rthe ECI cover (passenger side), and then ~.
remove the cowl side trim (passenger side).
7. REMOVAL OF REAR PILLAR TRIM
(1) Open the rear hatch.
__=
(2) Insert the trim stick-between the budy and. the clip, _
twist downward, and remove the rear pillar trim.