Plate Settings Controls - BIO RAD ZE5 User Manual

Plate Settings Controls

The Plate Settings controls apply to the entire plate or tube rack, with the exception of panel names.
Table 34. Plate Settings items and their functions
Item Function
Displays the name of the currently loaded experiment.
Displays the name of a panel (group of samples) within the experiment that
has uniquely configured parameters, parameter names, or settings.
Shows the route the sampler will take across the tube rack/plate.
Runs each column in turn, starting with column 1.
Runs each row in turn, starting with row A.
Runs in serpentine fashion, row-by-row. Runs A1 through A8, B8
through B1, C1 through C8, and so forth.
Runs in serpentine fashion, column-by-column. Runs A1 through E1,
E2 through A2, A3 through E3, and so forth.
Allows you to set the sample temperature from 4–37ºC, in 1º increments.
The default is 15ºC. The actual temperature appears in the workspace after
the run list has been created.
When on, the system shuts down automatically after the entire run list has
been acquired.
Setting Up the Run List
User Guide | 179