BIO RAD ZE5 User Manual page 187

Tip: If you plan to use the same name components on all positions, you can skip this step.
2. Click the Multiple tab in the Sample Naming panel.
There are five available name components:
n
Date
n
Well ID — well position (for example, A1, B5)
n Sequence ID — order in which positions will be acquired
n
Experiment Name
n Custom — allows you to create your own prefix or suffix
3. Select the checkbox for the components you want to include in the name.
4. To use the Custom name component, type a value in the Custom box.
Setting Up the Run List
User Guide | 185