Working With Compensation In The Analysis Tab - BIO RAD ZE5 User Manual

Cell analyzer and everest software
Table of Contents

Advertisement

Below the plate map, the following information about the selected position is displayed:
n
Sample position
n
Sample name
n
Sample type (Sample, Compensation/Control, Wash, or Reagent)
n
Target Flow Rate (μl/sec) or Target Event Rate (events/sec)
n
Sample Volume (μl)
n
Event Limit
n
Event Count
Below this area, you can click the Voltages arrow to display or hide PMT voltage conditions at the time
of data acquisition.
Tip: If you want to add plot annotations or otherwise modify plots for multiple sample positions for
presentation purposes, make these modifications in the Analysis tab, then use the Batch Print
feature of the Publish tab to save the report to PDF or print it. For more information, see
Report for All Positions on page

Working with Compensation in the Analysis Tab

In the Analysis tab, you can either view the compensation matrix and edit it manually, or you can apply
automatic compensation.
For detailed information on applying compensation automatically or manually, see
Applying Fluorescence
Compensation. For an example experiment utilizing compensation, see
Appendix B, Example 9-Color Immunophenotyping
312.
Experiment.
Analyzing Data
Printing a
Chapter 9,
User Guide | 307

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZE5 and is the answer not in the manual?

Table of Contents

Save PDF