BIO RAD ZE5 User Manual page 279

Loading Sample Media
Table 39. Setup Mode Control Items
Item Function
View Run List — expands the run list to display settings for the current
experiment.
Edit Experiment — guides you through the Experiment Builder to modify
the experiment as needed.
— allows you to specify an event
Acquisition Limit for Record Function
or volume limit for recording data in Setup mode.
Record — appears after acquisition begins. Starts saving data to an FCS
file.
Play — moves the probe to the selected position, lowers it, and turns on the
sample pump to run sample. Begins streaming data to Everest Software.
Stop — ends data acquisition and turns off the sample pump. Replaces the
Play button when sampling begins.
— pauses sampling. Time gaps that correspond to pause
Pause Run List
times appear in the data file.
Resume Run List — resumes sample flow. Replaces the pause button
when sample is paused.
— clears the data displayed in plots in the workspace. Does not
Clear Data
clear data being stored.
User Guide | 277