Settings Screen - BIO RAD ZE5 User Manual

Settings Screen

After you have configured your sample and controls in the Samples screen, you can configure other
aspects of your experiment in the Settings screen.
In the Settings screen you can
n
Create plots, regions, and gates for data collection and analysis
For information about creating plots, see
information on adding regions and gates and using other plot tools for data collection and
analysis, see Using Plot and Histogram Tools on page
n
Set initial PMT voltages, if known from a previous experiment or specifically for this particular
sample type
For information about setting PMT voltages, see
Instrument Settings on page
n Configure initial trigger and threshold values, if known from a previous experiment or specifically
for this particular sample type
For information about configuring trigger and threshold values, see
Settings on page 257.
The Plate and Run List panes are similar to those that were set up in the Samples screen. These
panes summarize the experiment in graphical and tabular format.
Creating Plots and Histograms on page
PMT Control Panel on page 85
257.
217.
Configuring Instrument
Experiment Builder
209. For
and Configuring
User Guide | 83