BIO RAD ZE5 User Manual page 165

Table 33. Steps in the shutdown process
Reloading Flash Defaults
Setting Rinse Pressure
Turns off the loader, reloads the instrument-specific configuration
settings from the onboard flash memory to Everest Software. This
includes the instrument's serial number, hardware configuration,
channel, and pinhole configuration, as well as settings specific to the
loader, sample pump, bulk fluidics, fluidics, flow rate and volume
calibration.
Sets rinse pressure to the configuration value (typically 10 or 12 psi)
for subsequent steps.
Shutting Down
User Guide | 163