Adding A Stat Tube To A Plate Or Rack - BIO RAD ZE5 User Manual

Running a Quick (Stat) Sample

Adding a Stat Tube to a Plate or Rack

To accommodate large volumes of sample, you can add a single stat tube to an experiment that is
based on a plate or tube rack. An added stat tube can be assigned only the Sample position type; it
cannot be assigned as Wash, Reagent, or Setup. Agitation, temperature, and high-throughput settings
are not applicable to stat tubes.
To add a stat tube to an experiment
1. In the Plate Setup pane, click Add Stat Tube.
User Guide | 267