Experiment Builder; Name Screen - BIO RAD ZE5 User Manual

Chapter 4 Everest Software

Experiment Builder

Clicking New Experiment starts the Experiment Builder, which guides you through experiment setup
using four sequential screens.
Table 13. Experiment Builder screens
Screen
Name
Fluorophores
Samples
(Workspace)
Settings

Name Screen

The Name screen allows you to assign a unique name to the experiment.
64 | ZE5 Cell Analyzer and Everest Software
Description
Allows you to assign a unique name to the experiment.
Guides you in selecting fluorophores and choosing the appropriate detection
channels.
Facilitates configuration of the sample media required for the experiment, as
well as the acquisition settings for each control and sample.
Facilitates setup of the workspace, where you can create plots, enable lasers,
adjust PMT voltages, and set the trigger/threshold as needed.