Setting Plot Display Defaults And Stopping Acquisition - BIO RAD ZE5 User Manual

Chapter 5 Configuring the System
Preferences specific to plots take effect the next time you create a new plot. Preferences related to
vacation mode take effect as soon as the current user logs out. All other global preference changes
take effect as soon as they are saved. To avoid saving any unneeded changes made to the global
preferences, click Cancel.
Note: For information on external DI water and waste settings, see
on page 381. System sleep time settings are reserved for future use.

Setting Plot Display Defaults and Stopping Acquisition

In the Acquisition and Plots area of the global preferences, you can determine the size of plots added
to the workspace, specify whether off-scale data indicators appear in plots, and set the system to stop
acquisition when sample runs dry.
To set plot display defaults
1. In the Home window, click Global Preferences.
2. In the Acquisition and Plots area, select the Show Off Scale Data Indicator checkbox to display
indicators when events fall on or below a plot axis.
112 | ZE5 Cell Analyzer and Everest Software
Specifying External Port Use