Experiment Buttons - BIO RAD ZE5 User Manual

Chapter 4 Everest Software
Legend
1
Acquisition, Analysis, and Publish tabs; after
setting up an experiment and acquiring
samples in the Acquisition tab, you can move
data to the Analysis and Publish tabs
2

Experiment buttons

3
Help and Information menu
4
Home window tools and logged-in user name
5
Recent Experiment Sessions panel
6
Quick actions
Experiment Buttons
This set of large buttons in the Home window allows you to initiate experiments in various ways.
Table 8. Home window experiment buttons and their functions
Button Function
Launches the Experiment Builder, which guides you through setup of
fluorophores/detectors, samples, workspace, and plots.
Skips the Experiment Builder and allows you to run a sample quickly from the single tube
position in the loader. By default, all lasers and all parameters are active when acquiring
sample in stat tube mode.
Loads a previously generated experiment for use as a template for the current experiment.
After the experimental file is opened, you can modify it before running it.
Imports the following settings from the selected run list file: fluorophores (activated PMTs),
parameter names, instrument settings, plots, and compensation matrix.
Note:
Sample positions are not imported, so, for example, you can import a run list
configured for tubes and easily reconfigure it for a plate.
58 | ZE5 Cell Analyzer and Everest Software
Further Information
Experiment Builder on page
Experiments and Workspaces on page
Acquiring Samples on page
Analyzing, Saving, and Printing Data on page
301
Experiment Buttons on page 58
Help and Information Menu on page 59
Home Window Tools on page 60
Recent Experiment Sessions on page 62
Quick Actions on page 63
64, Creating
167,
275, and