Table of Contents
Advertisement
Chapter 1 Introduction
6.
You are prompted to install the ZE5 firmware and ZE5 service tool updates. Click Install.
Tip: Installing the updates can take a few minutes. After the updates are installed you see the
Everest Software installer wizard's Welcome screen.
7.
On the Welcome screen, click Next.
8.
Accept the license agreement and click Next.
9.
Follow the remaining instructions in the wizard to install the software.
10. When the installation is complete, click Finish to exit the wizard.
When completed, the Everest icon appears on the desktop.
Updating ZE5 Instrument Firmware
When you start Everest Software 2.2, the ZE5 Cell Analyzer detects the new firmware package and
begins the update process.
Important:
The firmware update process can take up to 5 minutes. The Everest Firmware Update
Utility window and then the ZE5 Service Tool dialog box appear on the screen. Do not close the
dialog box or shut down the instrument during the update.
To update the ZE5 instrument firmware
1.
Start Everest Software on the Everest computer.
If the firmware update is required, Everest Software displays the ZE5 Firmware Update dialog
box.
2.
Click Update firmware.
The Everest Firmware Update Utility window appears and then the ZE5 Service Tool launches.
The firmware update begins.
When the update is complete, the instrument starts and the software displays the login screen.
3.
Log in to Everest Software.
Administrator and User Rights
Everest Software is the main interface for controlling the ZE5 Cell Analyzer. The software features
available to you depend on whether you log in as an administrator or a standard user. Bio-Rad
recommends that at least two administrators be assigned per
administrators and standard users.
22 | ZE5 Cell Analyzer and Everest Software
system.Table 3
lists features available to
Advertisement
Table of Contents
Need help?
Do you have a question about the ZE5 and is the answer not in the manual?
Questions and answers