Ricoh Neptune-P1 Service Manual page 282

[0 to 300/100/4 mm step]
2402 SepAC Adj
Adjusts the separation ac voltage for roll paper and cut sheets.
1 Roll Paper
2 Cut Paper
2403 SepDC Adj
Adjusts the separation dc current. If this setting is too high, toner from the paper will cling to the
drum after transfer. The separation dc current can be set for plain paper, translucent paper,
and film for the leading edge, trailing edge, and areas outside the image.
1 RpPp:ILEdge
2 RpPp:OILEdge
3 RpTr:ILEdge
4 RpTr:OILEdge
5 RpFm:ILEdge
6 RpFm:OILEdge
11 BpPp:ILEdge
12 BpPp:OILEdge
13 BpTr:ILEdge
Separation AC Current Adjustment
[18 to 466/280/1 mA step]
Separation DC Current DFU
Roll Paper: Plain Paper:
Image Leading Edge
Roll Paper: Plain Paper:
Outside Image Leading
Edge
Roll Paper: Translucent:
Image Leading Edge
Roll Paper: Translucent:
Outside Image Leading
Edge
Roll Paper: Film: Image
Leading Edge
Roll Paper: Film: Outside
Image Leading Edge
Bypass: Plain Paper: Image
Leading Edge
Bypass: Plain Paper:
Outside Image Leading
Edge
Bypass: Translucent: Image
Leading Edge
SP2-xxx Drum
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1] mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
5
281