Ricoh Neptune-P1 Service Manual page 126

Disassembling the Transfer Unit
1. Left cap [A] (tab release)
2. Right cap [B] (tab release)
• To remove a paper guide, lift it a small distance and move it in the direction of the center. Make
a note of the position of each guide. Each guide must be installed at its former position.
3. Paper guides [C] (x4)
4. Transfer wire [D]
5. Separation wires [E]
Reinstallation
• Each paper guide pair must be installed at its former position.
• For each pair, the high guide is set on the outer side and the low guide is set on the inner side.
• If each guide is not installed at its former position, this will cause paper to wrinkle.
Around the Drum
3
125