Power On - Ricoh Neptune-P1 Service Manual

• [4] Gear (x1)
• [5] Timing pulley/gear (x1)
• [6] Tension bracket (x2, Spring x1) (Screw
• [7] Clamps (x3)
• [8] Circular clamp (x1)
8. Route the harness [9] through the edge clamp [10] and close it (x1).
9. Connect the harness [11].
10. Route the harness through the clamps and close them.
11. Reattach the left and right covers of the folder unit.
12. Attach:
[1] Left sponge strip (peel tape from the back)
[2[ Right sponge strip (peel tape from the back)
• Align the end of the left sponge strip as shown at
• Align the end or the right sponge strip as shown at
13. Reattach:
[3] Left Cover (x3)
[4] Right Cover (x3)

Power On

The folder unit must be switched on before the main machine.
s the shoulder screw.)
.
.
Manual Feeder (D333)
1
89