Ricoh Neptune-P1 Service Manual page 320

Channel MAX
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth setting varies
6
for different countries.
[1 to 14/1]
Channel MIN
Sets the minimum range of the bandwidth for operation of the wireless LAN. This bandwidth
7
setting varies for different countries.
[1 to 14/1]
WEP Key Select
Determines how the initiator (SBP-2) handles subsequent login requests.
[00 to 11/00/1]
11
Note: There are four settings (binary numbers): 00, 01, 10, 11. These settings are possible
only after the wireless LAN card has been installed.
00: 1st key. If the initiator receives another login request while logging in, the request is refused.
01, 10, 11: 2nd, 3rd, 4th keys are "Reserved".
5842 GWW Analysis DFU
Setting 1
This is a debugging tool. It sets the
1
debugging output mode of each Net
File process.
Bit SW 0011 1111
Setting 2
2
This SP codes sets the optional setting
for message log time stamp. Bit 7 is the
GWWS Analysis Mode
Bit Groups
0 System & other groups (LSB)
1 Capture related
2 Certification related
3 Address book related
4 Machine management related
5 Output related (printing, delivery)
6 Repository related
Bit
0-6 Not Used
7 Message log
SP5-xxx Mode
5
319