Ricoh Neptune-P1 Service Manual page 18

[Menu] [Menu]:> "Language"
Language
[Menu] [Menu]> "Maintenance">
"Timer Settings"> "Set Date" and
Date
"Set Time"
Time
Roll Feeder Installation
SP
1920 Cut Length Adjustment
Sets the cut length settings for the rolls installed in the roll feeder. These settings are
different for each machine. The settings are on a label attached to the right side of the
roll feeder drawer.
1920-111 Cut Length Adjustment: 1st Roll:297
mm:Plain Paper
1920-115 Cut Length Adjustment: 1st Roll:
1189 mm:Plain Paper
1920-211 Cut Length Adjustment: 2nd Roll:
297 mm:Plain Paper
1920-215 Cut Length Adjustment: 2nd Roll:
1189 mm:Plain Paper
1001-1 Leading Edge Registration – 1st Roll Adjust for 1st roll.
1001-2 Leading Edge Registration – 2nd
Roll
1002-1 Side-to-Side Registration – 1st Roll
1002-2 Side-to-Side Registration – 2nd Roll Adjust for 2nd roll.
Paper Cassette
1001-3 Leading Edge Registration –
Cassette
1002-3 Side-to-Side Registration – Cassette
Select the desired language if it has not been
selected.
Check the date and time setting. If they are not
correct, set the correct date and time.
Adjustment
Adjust for 1st Roll
Adjust for 2nd Roll
Adjust for 2nd roll.
Adjust for 1st roll
Adjust for Paper Cassette B853.
Preparation
1
17