5. Service Tables
4. Insert the SD card [2] with the firmware in SD card Slot 3. (If there is an SD card in Slot 3, remove it.)
5. Turn on the main power switch. "Please wait" then "Preparing to start firmware update" appears on
the LCD panel. After about 90 sec., the initial firmware update screen appears.
Browsing the Update Menu
5
1. [] or [] to display the module to update:
• Engine
• Network Support
• Web Support
• Printer
• Network DocBox (Document Server)
• System
2. [] displays ROM name.
3. [] again displays ROM version.
232