Ricoh Neptune-P1 Service Manual page 325

5. Service Tables
This SP is enabled only after the system administrator has set up a group password policy to
control access to the address book.
Compl Opt3
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to numbers and defines the length of the password.
[0 to 32/1]
64
Note:
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group password policy to
control access to the address book.
Compl Opt4
5
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to symbols and defines the length of the password.
[0 to 32/1]
65
Note:
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group password policy to
control access to the address book.
Encryption Start
94
Shows the status of the encryption function of the address book on the LDAP server.
[0 to 255/1] No default
Web Service
5847 2 sets the 4-bit switch assignment for the access control setting. Setting of 5848 1 has
5848
no effect on access and delivery from Scan Router. 5847 100 sets the maximum size of images
that can be downloaded. The default is equal to 1 gigabyte.
4 ac:UD
9 ?ac:Job Ctrl
11 ac:Dev Mng
22 ac:Uadmin
For 3 to 22 above switches access control on and off.
324
Complexity Option 3
Complexity Option 4
Acc. Ctrl.: User Directory (Lower 4 Bits)
Acc. Ctrl.: Job Control (Lower 4 Bits)
Acc. Ctrl: Device Management (Lower 4 Bits)
Acc. Ctrl: User Administration (Lower 4 Bits)