Ricoh Neptune-P1 Service Manual page 347

5. Service Tables
• An adjustment in the "+" direction lengthens the distance, and an adjustment in the "-"
direction shortens the distance.
41 FPlMvt:PExit
This SP adjusts the distance for the fan fold plate to move in order to guide the trailing edge of
the last fold out of the fan folder unit.
[-200 to +200/0/1 mm]
Note:
• An adjustment of 1 step is equivalent to 0.191 mm.
• An adjustment in the "+" direction moves the fan fold plates closer to the fan fold rollers,
and an adjustment in the "-" direction moves the plate away from the fan fold rollers.
42 FPL Stp:PExit
5
This SP adjusts the length of time that the fan fold plate stops after descending in order to output
trailing edge of the folded copy out of the folder unit after the last fold.
[-100 to +6000/0/1 msec.]
Note: An adjustment in the "+" direction lengthens the time, and an adjustment in the "-" direction
shortens the time.
43 FPL Tmg:PExit
This SP adjusts distance that the paper moves after the fan fold sensor pair detects the trailing
edge and switches ON until the fan fold plate starts to move when feeding the copy out of the
folder unit after the last fold.
[0 to 350/0/1 mm]
Note: An adjustment in the "+" direction lengthens the distance, and an adjustment in the "-"
shortens the distance.
6964 FF:Lngth Adj
These SP codes adjust the length of the folds. The summary below describes important terms
used in these SP descriptions. For more see the "Folder FD 6500 Service Manual".
There are two types of folding:
• Long folding. The folded copy looks like an accordion with the edges of the folded surfaces aligned.
• File folding. The same as long folding but the leading edge of the bottom sheet protrudes from the
bottom of the stack. This margin can be used to fasten the leading edge into a flat binder, or it can be
punched for filing in a ring binder.
346
Fold Plate Movement: Paper Exit
Fold Plate Halt: Paper Exit
Fold Plate Timing: Paper Exit
Length Adjustment (Folder)