Ricoh Neptune-P1 Service Manual page 238

List/Test Print
Multiple Lists
Config. Page
Error Log
Network Summary
Menu List
PS Config./Font Page
PDF Config./Font Page
Hex Dump
System
Print Error Report
Auto Continue
Memory Overflow
Printer Language
Sub Paper Size
Default Printer Lang.
Energy Saver 1
Energy Saver 2
Memory Usage
Spool Printing
Prints together: Configuration Page, Error Log, Network Summary,
Supply List
Lists important information about the machine: total page counter,
firmware version, device connection (device options installed),
connection equipment (installed peripherals), etc.
Prints an error report
Prints report about network status
Prints a list of all available menus.
Prints current configuration of installed PostScript fonts.
Prints configuration of all installed PDF fonts.
Prints a job as a hexadecimal dump
Can be set to print an error report every time a printer error or memory
error occurs.
Determines whether to resume printing after a system error occurs.
Determines whether a report is printed for a memory overflow.
Specifies the printer language
Specifies the alternate paper size to be selected automatically.
Specifies the printer language if the printer fails to detect the printer
language.
Switches the energy save mode on/off. When this is turned on, the
machine drops into energy save mode after every print job.
Specifies the idle time to elapse before the machine drops into energy
save mode. (Default: 15 min.)
Select either font or frame priority. (Default: Frame Priority)
Determines whether spooling completes before printing begins.
Menus
5
237