Ricoh Neptune-P1 Service Manual page 264

6 Trans.: Mode1
7 Trans.: Mode2
8 Trans.: Mode3
9 Trans.: Mode4
10 Trans.: Mode5
11 Film: Mode1
12 Film: Mode2
13 Film: Mode3
14 Film: Mode4
15 Film: Mode5
16 Plain:Ltemp
1932 TTemp:PreRol
Sets the target fusing temperature of the pressure roller for plain paper, translucent paper,
and film. These temperatures are used for pressure roller feedback. Turn the machine power
off/on after changing the settings.
Important:
• Modes "1" to "5" below refer to the paper type and thickness settings selected in User
Tools (see "Paper Thickness Default Selection" in this section).
• After adjusting these SP's, you must turn the machine power off/on.
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
6 Trans.: Mode1
7 Trans.: Mode2
8 Trans.: Mode3
[120 to 220/205/5
[120 to 220/195/5
[120 to 220/165/5
[120 to 220/*/5
[120 to 220/195/5
[120 to 220/190/5
[120 to 220/185/5
[120 to 220/175/5
[120 to 220/195/5
Target Temperature: Pressure Roller
[60 to 80 /100/5
[60 to 80 /85/5
[60 to 80 /60/5
[60 to 80 /130/5
[60 to 80 /100/5
[60 to 80 /60/5
SP1-xxx Feed
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
o
C]
5
263