Table of Contents
Advertisement
The storing of the certification has failed, and the GW URL is being notified of the
16
failure of this event.
The certification update request has been received from the GW URL, the GW
URL was notified of the results of the update after it was completed, but a
17
certification error has been received, and the rescue certification is being
recorded.
The rescue certification of No. 17 has been recorded, and the GW URL is being
18
notified of the failure of the certification update.
Cer Abnml Cause
Displays a number code that describes the reason for the notification requesting the
certification update.
0
Normal. No request for certification update in progress.
1
Certification update in progress due to expiration of certification.
68
2
SSL error has been issued after the certification has expired.
3
There has been a shift from a common to individual certification.
4
There has been a common certification without ID2.
5
No certification has been issued.
6
GW URL does not exist.
Cer Updt Reg ID
69
The ID of the request for certification.
Firm Updating
83
Displays the status of the firmware update.
Firm Up Flg No HDD
84
This setting determines if the firmware can be updated, even without the HDD installed.
Firm Up User Conf
This SP setting determines if the operator can check the previous version of the firmware
85
before the firmware update execution. If the option to check the previous version is selected,
a notification is sent to the system manager and the firmware update is done with the firmware
files from the URL.
Certification Error
Certification Update: Requested ID
Firmware Updating
Firmware Updating: No HDD Unit
Firmware Update with User Colnfirmation
SP5-xxx Mode
5
309
Advertisement
Table of Contents
Troubleshooting
