Ricoh Neptune-P1 Service Manual page 94

• SD card slots 2 and 1 can be used for application programs.
• Slot 3 is used for machine servicing and application program installation (firmware updates, NVRAM
upload and download, application move and undo).
• If the service technician needs to use Slot 3 for servicing and there is an SD card in Slot 3, the
application SD card must be removed.
• If the customer needs more than three applications, one or more application must be moved to one
SD card with SP5873-1.
Data Overwrite Security Type D (B735-18)
Service:
• Firmware update
• NVRAM Data Download/Upload
• Application Move/Undo
Restrictions and Precautions on the Use of SD Cards
• When an application is moved from one SD card to another SD card, the authentication data is
transferred with the application program to the target SD card.
• Do not use an SD card if it has been used with a computer or other device. (The SD card may not
operate correctly.)
• The original SD card received with purchase of the application program is the only evidence that the
customer is licensed to use the application. For this reason, the original SD card should be stored at
the work site as proof of purchase by the customer. Also, the service technician may occasionally
need to check the dates and version numbers SD cards during troubleshooting.
• After an SD card has been used to combine applications on one card, it cannot be used for any other
purpose.
Application
Installation of MFP Options
Slot
1 2 3
Yes No No
No No Yes
1
93