Around The Drum; Charge Corona Wire, Grid Wire, Wire Cleaner - Ricoh Neptune-P1 Service Manual

3. Replacement and Adjustment

Around the Drum

Charge Corona Wire, Grid Wire, Wire Cleaner

3
1. Remove:
• Side covers (See p.112 "Side Covers")
• Front panel, open the top. (See p.114 "Front Panel and Opening the Top")
2. Leaf spring [A] (x 1)
3. Leaf spring [B] (x 1)
4. End plate [C] (x 1)
5. Disconnect the cleaning pad [D] and then move it to the left.
6. Charge corona unit [E] ( x 2)
Reinstallation
• Set the left end of the charge corona unit in the hole on the left first (viewed from the rear of the
machine).
• Next, set the right end into the hole on the right.
• Attach the right plate, then the left plate. Make sure the T-bar of the cleaning pad [D] is connected to
the guide wire.
120