1. Installation
1
2. Disconnect the cables of the standard Ethernet board and standard USB board.
3. Cover the standard connection points with the caps to prevent accidental reconnection of the standard
cables.
4. Remove the cover of Slot B [1] ( x 2).
5. Insert the Gigabit Ethernet Board [2] into Slot B (Knob x 2).
6. Attach the ferrite core provided with the Gigabit Ethernet Board to the end of the cable [1] to be
attached to the network.
7. Attach the ferrite core provided with the main machine to the end of the cable [2] to be attached to
the main machine.
98