Ricoh Neptune-P1 Service Manual page 312

GtWay Host DFU
96
Used by designers for debugging and evaluation of gateway security devices.
GtWay URL Path DFU
97
Used by designers for debugging and evaluation of gateway security devices.
Debug Rescue G/W URL Set DFU
99
Executing this SP sets "i01/AS" in the rescue gateway URL path. Used for 2-line displays,
or when input with lowercase alphanumeric characters is not possible.
Polling Man Exc
Executes manual polling. Embedded RC Gate periodically polls the @Remote Gateway by
200
HTTPS. This is called "center polling". Use this SP at any time to poll the @Remote supply
center.
Instl: Condition
Displays a number that indicates the status of the @Remote service device.
0 Neither the @Remote device nor Embedded RC Gate device are set.
The Embedded RC Gate device is being set. Only Box registration is completed. In
1
this status the Basil unit cannot answer a polling request.
201
The Embedded RC Gate device is set. In this status the Basil unit cannot answer a
2
polling request.
The @Remote device is being set. In this status the Embedded RC Gate device
3
cannot be set.
4 The @Remote module has not started.
Instl: ID #
202
Allows entry of the number of the request needed for the Embedded RC Gate device.
Instl: Reference
203
Executes the inquiry request to the @Remote GW URL.
Instl: Ref Rslt
Displays a number that indicates the result of the inquiry executed with SP5816 203.
204
0 Succeeded
Gateway Host
Gateway URL Path
Manual Polling
Installation Condition
Installation ID Number
Installation Reference
Installation Reference Result
SP5-xxx Mode
5
311