3. Replacement and Adjustment
Development
Development Unit
3
1. Remove:
• Side covers (See p.112 "Side Covers")
• Toner hopper cover (See p.115 "Toner Hopper Cover")
• Idle registration roller panel (See p.116 "Idle Registration Roller Panel")
• Toner cartridge
2. Development unit [A] ( x 2, x 6)
• The development unit is very heavy. Pull it out slowly.
Reinstallation
• Attach the large shoulder screws [B] on each side first, then attach the flat-head screws [C].
126