Ricoh Neptune-P1 Service Manual page 97

1. Installation
1. Wireless LAN Card
1
1. Adapter Board
1. Cover Cap
Installation
• Before doing the procedure, turn off the main power switch and unplug the machine from its power
source.
1. Make sure that the machine is switched off and disconnected from its power source.
2. Remove the cover [1] of Slot B ( x 2).
3. Insert the adapter board [2] into Slot B (Knob  x 2).
4. Insert the wireless LAN card [3] into the adapter board [2].
5. Attach the cap [4].
6. Reconnect the machine to the power source and turn the main power switch on.
7. Print a Configuration Page to confirm correct installation:
• [Menu]
• [] or []> "List/Test Print"> [OK].
• []> "Config. Page"> [OK]> "Config. Page Printing..."
96
Description Qt'y
1
1
1