T&S Power Pack - Ricoh Neptune-P1 Service Manual

4. Insert the SD card with the NVRAM data in SD card Slot 3.
5. Switch the main power switch on.
6. Go into SP mode and do SP5825.
7. Follow the instructions on the operating panel display to execute the download.
8. Switch the main power switch off.
9. Switch the main power switch on.
10. If the Data Overwrite Security Unit Type D (B735-18) has been installed, it must be installed again.
11. Do SP3001 2 to initialize the ID sensor.
T&S Power Pack
Remove:
• PSU (See p.168 "PSU/Circuit Breaker")
• [A] T&S power pack mounting plate ( x 2,  x 3,  x 1)
• [B] T&S power pack ( x 1)
Boards
3
173