Ricoh Neptune-P1 Service Manual page 204

Measuring the CRC for the boot monitor and
operating system program resulted in an error.
Self-diagnostic Error 9: Optional RAM
829 B
The optional RAM returned an error during
the self-diagnostic test.
Self-diagnostic Error 10: Clock Generator
A verify error occurred when setting data
838 D
was read from the clock generator via the
I2C bus.
851 B IEEE 1394 I/F Error
IEEE1394 cannot be used due to a faulty driver
setting or poor I/F connection.
Wireless LAN Error 1
During machine start-up, the machine can
853 B
access the board that holds the wireless
LAN, but not to the wireless LAN card.
Wireless LAN Error 2
During machine operation, the machine can
854 B
get access to the board that holds the
wireless LAN, but not to the wireless LAN
card (802.11b or Bluetooth).
Wireless LAN error 3
855 B
An error was detected on the wireless
LAN card.
Wireless LAN error 4
856 B
• Software defective
• Controller board defective
• Replace the optional memory board
• Controller board defective
• Replace the controller board
• Faulty PCI connection
• IEEE1394 board defective
• Controller board defective
• Wireless LAN card missing (was
removed)
• Wireless LAN card missing (was
removed)
• Wireless LAN card defective
• Wireless LAN card connection incorrect
SC Code Descriptions
4
203