Ricoh Neptune-P1 Service Manual page 277

5. Service Tables
1949 PreFB STCoef
The formula above uses the setting of this SP to determine the pressure roller feedback
temperature. The result of this calculation is used to calculate the hot roller target temperature.
Note:
• Settings can be selected below for the paper type, mode, and paper length.
• Modes "1" to "5" below refer to the paper type and thickness settings selected in User
Tools (see "Paper Thickness Default Selection" in this section).
[0 to 1/0/0.1]
5
11 NMod1:>611
12 NMode1:461-610
13 NMode1:298-460:
14 NMode1:< 297
21 NMode2:> 611
22 NMode2:461-610
23 NMode2:298-460
24 NMode2:< 297
31 NMode3:> 611
32 NMode3:461-610
33 NMode3:298-460
34 NMode3:< 297
41 NMode4:> 611
42 NMode4:461-610
43 NMode4:298-460
44 NMode4:< 297
276
Pressure Roller Feedback Standard Temperature
Coefficient
Normal Mode1: > 611mm
Normal Mode1: 461-610mm
Normal Mode1: 298-460
Normal Mode1: < 297mm
Normal Mode2: > 611mm
Normal Mode2: 461-610mm
Normal Mode2: 298-460
Normal Mode2: < 297mm
Normal Mode3: > 611mm
Normal Mode3: 461-610mm
Normal Mode3: 298-460
Normal Mode3: < 297mm
Normal Mode4: > 611mm
Normal Mode4: 461-610mm
Normal Mode4: 298-460
Normal Mode4: < 297mm