Ricoh Neptune-P1 Service Manual page 69

1. Installation
1. From the main machine remove:
• [1] Rear cover (x2)
• [2] Controller box cover (x1)
1
• [3] L-plate covering the right terminal of the controller box (x2).
• Discard the plate. Screws are provided as accessories, but you may want to keep the screws
if extra screws are needed.
2. Remove:
• [1] Ground plate (x3) (Open the paper exit cover C1 and paper exit unit C2 to remove vertical
screw
• [2] PCB shield cover (x8)
68
.)