Ricoh Neptune-P1 Service Manual page 56

Roll Feeder (B852)
Attaching the Narrow Mylars to the Main Machine
1
1. Find the 5th space from the left end of the rear cover.
2. Use a clean cloth, moistened with a small amount of alcohol, to clean this area and the bottom edge
of the cover.
3. Remove the tape from each end of one of the narrow mylars.
4. Attach one end to the top edge of the cover .
• The top edge must be flat and parallel to the edge of the cover. The right edge of the mylar must
be parallel to ridge .
5. Attach the other end of the mylar to the bottom edge of the cover .
6. Do this procedure again to attach the other narrow mylar to the right side of the cover.
55