Printer Jams - Ricoh Neptune-P1 Service Manual

Code
C Fusing Unit (Exit)
N1 Folder unit entrance (from main unit)
• The operator must open and close the upper unit to release a jam in the fusing unit.
• If the operator opens and closes the paper exit cover during copying, this is not recorded in the jam
record.
• A paper feed jam that occurs just after the main power switch or operation switch comes on is not
recorded in the jam record.

Printer Jams

Plotter Standby Jams
Code
001 Initial Jam: Registration Sensor
Initial Jam: Paper Set Sensor
Initial Jam: Fusing Exit Sensor
Plotter Late Jams
Code
003 Roll 1 Non-Feed Jam
004 Roll 2 Non-Feed Jam
005 Paper cassette Non-Feed Jam
008 Roll Feeder Exit Jam
013 Registration Jam
016 Fusing Exit Jam
034 Bypass Non-Feed
Location
Location
Location
Code
V1 Manual feeder feed entrance
Display
B
B
C
Display
A2
A2
A1
A2 RF exit sensor not ON
B Registration sensor not ON
C Fusing exit sensor not ON.
B Paper set not ON.
Jam Code Tables
Location
Comment
Comment
4
213