Table of Contents
Advertisement
4. On each side of the unit, insert the pin [1] through the arms of the joint bracket
lower folder positioning bracket
• If the pins cannot be inserted because the holes are not aligned, use a wrench to turn the nuts
on the legs under each corner of the folder unit until the holes are aligned.
•
and
must both be adjusted with the same number of turns.
•
and
must both be adjusted with the same number of turns.
5. Remove both pins after you make sure that they can be easily inserted.
.
Folder Unit (B889)
1
into the hole in the
77
Advertisement
Table of Contents
Troubleshooting
