Ricoh Neptune-P1 Service Manual page 340

7 Not used
6 Not used
5 Not used
4 Not used
3 Transport JG door sensor (F)
2 Transport JG door sensor (U)
1 Transport JG door sensor (R)
0 Cross fold door sensor (R)
14 Door2:XF
Bit Input
7 Not used
6 Not used
5 Not used
4 Transport JG door microswitch (F)
3 Cross horizontal microswitch 1
2 Cross horizontal microswitch 2
1 Inverter door microswitch
0 Inverter door microswitch
6118 FU Output Chk
Use this SP to switch on the motors, clutches, and solenoids of the Folder unit B889 to test their
operation.
Important: After switching on a motor, clutch, or solenoid, be sure to switch it off after you finish
your work.
1 TrptM:Fwd:FF
2 BpFeedCL:FF
3 PprEnt CL:FF
---
---
---
---
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
Door 2: Cross Folder (Not Used)
Folder Output Check
Transport Motor: Fwd: Fan Folder
Bypass Feed Clutch: Fan Folder
Paper Entrance Clutch: Fan Folder
SP6-xxx Peripherals
Status
---
---
---
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
5
339