Ricoh Neptune-P1 Service Manual page 367

5. Service Tables
807x 3 3 Pages
807x 4 4 Pages
807x 5 5 Pages
807x 6 6 to 10 Pages
807x 7 11 to 20 Pages
• Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
• If a job is paused and re-started, it counts as one job.
• If the finisher runs out of staples during a print and staple job, then the job is counted at the time the
error occurs.
• When printing the first page of a job from within the document server screen, the page is counted.
5
8381
8384
8387
838x 1
838x 2
838x 3
838x 4
838x 5
366
807x 10
807x 11
807x 12
807x 13
807x 14
T:Total PrtPGS
P:Total PrtPGS
O:Total PrtPGS
Field Number
Length (High)
Length (Low)
Area (High)
Area (Low)
Note:
• The values for "Length" are displayed in mm. If a "Length" reading is "42126" this
is 42,126 mm (42.126 m).
• The values for "Area" are displayed as mm
this is 33,213,257 mm
• The counts for the "Length" and "Area" start with "Low". Once the count exceeds
the width of the field on the display the "Low" field will reset to "0" and the count
overflows to the "High" SP codes. (This is necessary because the fields of the "Low"
SP codes are limited to 8 digits and not wide enough to display the full reading
for a reading larger than 8 digits.)
• Always check the "Low" SP first. If the "Low" display is zero, check the "High" field.
101 to 300 Pages
301 to 500 Pages
501 to 700 Pages
701 to 1000 Pages
1001 to Pages
These SP's count the number of pages printed by the
operator. The counter for the application used for storing
the pages increments.
[0 to 99 999 999/ 0 / 1]
Total number of copies (regardless of size)
Total length
Total length
Total area coverage
Total area coverage
2
. If an "Area" reading is "33213257"
2 2
(33,213.257 m ).