Ricoh Neptune-P1 Service Manual page 352

• If the first fold is a peak fold, this SP setting determines the length even number sections,
excluding the 1st section.
• If the first fold is a valley fold, this SP setting determines the length of odd sections.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
44 FFold:FV S2
This SP modifies the operation of the fan fold sensor (R) to determine the lengths of the odd and
even sections for long fan folding) including file flap folding).
• If the first fold is a peak fold, this SP setting determines the length even number sections.
• If the first fold is a valley fold, this SP setting determines the length of odd sections, excluding
the 1st section.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
45 FL:FP1:A3SEF
This SP fine adjusts the length of the sections between folds for copies printed on A3 SEF paper.
[-20 to +20/0/0.1]
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
46 MFL:OS (5-18)
This SP adjusts the lengths of the folds for odd numbered sections at folds 5 to 18 only. The
higher the setting, the wider the folded length.
[-70.0 to +70.0/0.0/0.1]
47 MFL:ES (5-18)
This SP adjusts the lengths of the folds for even numbered sections at folds 5 to 18 only. The
higher the setting, the wider the folded length.
[-70.0 to +70.0/0.0/0.1]
48 MFL:OS (19-30)
This SP adjusts the lengths of the folds for odd numbered sections at folds 19 to 30 only. The
higher the setting, the wider the folded length.
[-70.0 to +70.0/0.0/0.1]
49 MFL:ES (19-30)
This SP adjusts the lengths of the folds for even numbered sections at folds 5 to 18 only. The
higher the setting, the wider the folded length.
[-70.0 to +70.0/0.0/0.1]
Margin Fold: 1st Fold Valley: After 2nd Fold
Fold Length: 1st Fold Peak: A3 SEF
Margin Fold Length: Odd Sections (5-18)
Margin Fold Length: Even Sections (5-18)
Margin Fold Length: Odd Sections (19-30)
Margin Fold Length: Even Sections (19-30)
SP6-xxx Peripherals
5
351