Ricoh Neptune-P1 Service Manual page 230

6. [] or []> Scroll through the level 1 SP code titles to display the SP code that you want to open
("2801", for example) > [OK].
7. [] or []> Scroll through the sublevels of the selected SP code (the "001" numbers), then press [OK]
to open the settings screen.
8. When you are finished doing the setting, press [OK].
9. Press [Escape] to return to the previous level and do other settings.
-or-
To leave the SP mode: [Escape]> "SP mode initial screen"> [] or []> "End"
[OK]> Standby
What's on the SP Mode Screen?
Using the SP Mode
5
229