Ricoh Neptune-P1 Service Manual page 185

3. Replacement and Adjustment
3
3. Touch "SP Mode" and adjust these SPs if a measurement is not in the standard range.
SP
1001-1
1001-2
1001-3
1001-5
1002-1
1002-2
1002-3
1002-5
Step 3: Erase Margins
Do these SPs to replace the settings done in Step 1.
184
Standard:
Leading Edge Registration – 1st Roll
Leading Edge Registration – 2nd Roll
Leading Edge Registration –Cassette
Leading Edge Registration – By-pass Feed
5 ±0.5 mm
Side-to-Side Registration – 1st Roll
Side-to-Side Registration – 2nd Roll
Side-to-Side Registration –Cassette
Side-to-Side Registration – By-pass Feed
Comments